1,441 to 1,460 of 3,093
-
Closed
Consultation for OEM baby clothes
We would like to discuss OEM of baby clothes.
We are looking for a factory that can manufacture a total of 500 items with a delivery date of 4/1/2024.
One size fits all, 70~80cm.
The items are knee-length pants, long pants, tops, leg warmers, and small belt covers.
These are not difficult products. We are looking for a factory that is committed to Japanese manufacturing, uses non-formalin fabrics, and can manage formalin well.
We would like you to arrange the fabric and materials, and even pack the bags.
We have some patterns, but we are looking forward to hearing from factories that can provide us with patterns, samples, and mass production.
Thank you very much in advance.
(*Translated from Japanese.) -
Closed
Consultation for OEM production of T-shirts
In contrast to general apparel products, which are required to cut UV rays and prevent UV rays, we are considering producing T-shirts using fabrics with the highest possible UV transmittance (fabrics that allow UV rays to pass through well).We are looking for a company that can produce T-shirts that are not too transparent, and that are extremely comfortable to wear.
If you have any ideas on how to achieve this, please lend us your wisdom.
(*Translated from Japanese.) -
Closed
Accessory oem consultation
We are planning to sell low-priced, high-end accessories targeting women in their 20s on our e-commerce site.
We are looking for an OEM company to sell the accessories as original accessories.
We are based in Tokyo, but we are open to any area as long as we can meet with you online.
We are looking for a company that can provide the following services.
Can you make a rough drawing based on the image (we have already prepared an atmospheric image)?
Is it possible to use surgical stainless steel 316L or 304L?
Is it possible to use cubic zirconia?
Is it possible to use 5A-8A (not essential, but good if possible)?
Is it possible to use European zirconia?
If Chinese zirconia, how good is the quality of the zirconia?
How long does it take from rough sketch to delivery?
How long does it take from rough drawing to delivery?
We would like to make each piece at a cost of up to 1,000 yen per piece.
We would like to have 10 types of necklaces, 10 types of rings, 10 types of earrings, and 3 types of bracelets.
We would like to make small lots of high quality.
(*Translated from Japanese.) -
Closed
Consultation for OEM production of menswear
I am planning to create a hiphop brand.
We are looking for a company that can produce small lots at the lowest possible cost.
We would also like to have patterns made.
We are thinking of making velour setups and field hockey shirts If the velour set-up is not ready in time for this season, we would like to make a field hockey shirt for summer wear.
(*Translated from Japanese.) -
Closed
Occasion brands for babies and kids
This SHOP selects international children's clothing for babies and kids We mainly pursue and select designs with an elegant atmosphere, good quality, and attention to detail.
We are now looking for an OEM/ODM company to develop original items such as dresses and rompers for occasions and events, targeting from maternity to kids
It would be helpful if you can handle small lots.
We are based in Tokyo, so it would be easier to have meetings in the suburbs, but any area is fine as long as we can have meetings online.
We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Designer brand OEM company
We are starting up a designer brand that sees fashion as an art piece and can convey a message to the world.We are currently looking for a factory to make docking denim We are looking for a company that can process both shirts and denim and can take on small-lot orders. We will provide the design and pattern
We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Consultation for OEM production of ladies' and men's knitwear and cut-and-sew garments
Thank you very much for your help.
We are currently considering producing knitwear with a patchwork design, inspired by Japanese kintsugi, in which various materials are joined together.
We are planning to launch a brand that incorporates traditional Japanese craft techniques and pays attention to the smallest details.
We are planning to sell our products in Paris, a city that understands Japanese culture, so we would like to stick to making clothes made in Japan.
Since this is our first collection, we would like to discuss with you the production lot and other details.
We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Production of custom-made suits
We are planning to sell order-made suits targeting university students who are about to start their careers and businessmen with limited working experience. We are looking for an OEM company for the development of the order-made suits We are looking for small lots and high quality. We are also planning to start up a business, so any area is acceptable as long as we can have meetings online. We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Consultation for OEM production of women's sweatshirt sweatshirts
I am thinking of selling sweatshirt sweatshirts for women in their 20s and 30s.My friend and I are thinking of selling them, and since we are beginners, we do not have the know-how from the production to the sales stage, so we would appreciate it if you could teach us that part as well. We are looking for a company in Shiga, Kyoto, or Osaka, and would like to meet you in person if possible. Thank you in advance.
(*Translated from Japanese.) -
Closed
We are looking for a knit production factory
We are purchasing silk yarns and are looking for a factory that can produce basic knitwear from low gauge to high gauge in the form of supplying 100% silk yarns.
We are looking for small lots and high quality.
We are based in Tokyo, but are open to any area.
(*Translated from Japanese.) -
Closed
Consultation on the production of women's and men's original brands
We are looking for an OEM company to produce a total coordination apparel brand for the 10s~20s target group. We are looking for a small lot and high quality. Our company is based in absorption, but we are open to any area as long as we can have online meetings. We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Consultation for OEM baby clothes
I am currently running a small select store.We would like to develop a total coordination apparel brand targeting babies. We are looking for an OEM company to develop a new line of sweatshirts and hoodies that can be linked together as a parent and child. We are looking for small lots and high quality. Our company is based in Aichi and Hamamatsu, but we are open to any area as long as we can have online meetings. We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Consultation for the production of mother bags
We are considering producing mother bags.
Our target audience is the child-rearing generation in their 20s and 30s.
We are considering selling on Amazon and Rakuten.
We are currently requesting quotes from several companies, but we would like to look at various other companies before deciding which one to order from.
We would like to request quotes for the following two items.
Product 1: Mother backpack
Reference product: [Keratta] Minima Backpack® Mother's Backpack [Light and minimal mother's backpack] Large capacity, lightweight women's mother's backpack, small, insulated bag
：https://amzn.asia/d/15e6Rs7
Improvements
1. Add a separate pocket on the back for valuables (wallet, etc.).
Add a chest belt as an accessory
3. Add a zipper at the back to allow for expansion if possible.
Product 2: Mother Tote
Reference product: [Encore] Active mothers' commitment High-quality nylon "high-visibility mothers' bag light and large capacity" tote bag Mothers' bag 2WAY with shoulder belt Water-repellent Casual travel Birthday gift Japan
https://amzn.asia/d/heyzAp1
We want to make it so that it can stand on its own.
2. 2 types of M and L size
3. Create a place inside to hold bottles, etc.
4. 3-way tote, backpack, and shoulder bag
Reference product: https://amzn.asia/d/3vCbdKp
Thank you for your cooperation.
(*Translated from Japanese.) -
Closed
Product production of street mix brand with unique design
We are looking for an OEM supplier for the production of a street mix brand of our own design.
We would like to have a wide variety of prints and would like to take on a minimum of 30-50 pieces. We would like to make long sleeve printed T-shirts, and we are considering illustrations. We would like to focus on the size, color of the fabric, and detailing of the garment.
(*Translated from Japanese.) -
Closed
Consultation on OEM production of lingerie and women's underwear
We are planning to start selling a women's apparel brand of inner wear and lingerie on the web, targeting women in their 10s~20s. We are looking for an OEM company to develop new innerwear and lingerie products. We are looking for small lots and high quality. We are currently based in Fukuoka, but we are open to any area as long as we can have meetings online. We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
Consultation for OEM of functional sports tights
We are planning to sell sports tights through EC and are looking for an OEM company.
We are assuming compression design and joint support functions.
▼Reference product https://store.wacoal.jp/disp/01_HZO699.html
We are hoping for small lot production.
The concept is "high-function sports tights at a price that anyone can afford".
I am an individual and have not set up a company at this time.
(*Translated from Japanese.) -
Closed
We are looking for OEM production for a unisex apparel brand.
We will open an online store at BASE.
We are a unisex brand targeting 20-30 year olds!
We would like to make a sweatshirt set-up for the first one, and would like to focus on embroidery, unique tags, fine details, fabric and size.
We are looking for suggestions for factories that can produce high quality products in low lots. We are based in Osaka and are not particular about the place of production. If possible, we would like to meet with the company directly and talk with them.
We are new at this, but we would appreciate your guidance and encouragement.
(*Translated from Japanese.) -
Closed
Requests for unisex clothing
We are developing a total coordination ladies apparel brand targeting men and women in their 10s to 30s on our e-commerce site. We are looking for an OEM company to develop new products such as backpacks and sweatshirts. We are looking for small lots and high quality. Our company is based in Tokyo, but we are open to any area as long as we can have online meetings. We look forward to hearing from you.
(*Translated from Japanese.) -
Closed
I'm looking for a company that can print large prints.
We mainly print news photos on T-shirts and pull-up hoodies,
We are preparing to start a charity brand where consumers themselves can actively communicate about social issues and war, and a portion of the proceeds will be donated to the organizations concerned.
We are looking for a company that can do a wide variety of prints, including inkjet and silkscreen, and that can take on a minimum order of 30 prints.
The reason we are looking for a print shop is because the size of the prints we are looking for cannot be handled by a print shop we know.
We are looking for a vendor that can print more than 40cm wide.
At the moment, we would like to use the existing BODY. We would also like to have tags and tagging done at the same time.
(*Translated from Japanese.) -
Closed
Consultation for trainer oem production
We are looking for a company that can oem for the launch of our brand.
We are planning to start with one type of sweatshirt. We are also looking for high quality and small lots. Our company is headquartered in Osaka, but we are open to any area as long as we can meet with you online.
(*Translated from Japanese.)